- Microcomputer Applications USB Devices Driver
- Microcomputer Applications Usb Devices Driver Windows 7
- Microcomputer Applications Usb Devices Driver Win 7
Note: This document was previously titled Working With USB Device Interfaces.
The I/O Kit provides a device interface mechanism that allows applications to communicate with and control hardware from outside the kernel. This document focuses on how to use that mechanism to create an application that detects the attachment of a USB device, communicates with it, and detects its detachment.
Motorola Device Manager contains USB drivers and software to connect your Motorola phone or tablet to your computer using a USB cable. Uninstall Faulty Device Driver. Right-click on Start button and then click on Device Manager. On the Device Manager screen, expand the entry for Universal Serial Bus Controllers right-click on the Unknown Device and click on Uninstall Device option. On the confirmation pop-up, click on OK to confirm. Xperia USB Driver - Official Driver Sony Xperia USB Driver allows you to connect your Sony Xperia devices to the Windows Computer without the need to install the Sony PC Suite Application. You can find the Official USB Driver for your Xperia Device below or through the Site Search. Sony Xperia 5 II SO-52A. The most common approach has been to implement a device driver, (termed as a USB client driver in this documentation set) and provide an installation package that installs the driver as the function driver in the device stack above the Microsoft-provided USB driver stack.
This document does not describe how to develop an in-kernel driver for a USB modem or networking device. If you need to do this, refer to the documentation and sample code listed in See Also.
Important: If your application is sandboxed, it must request the com.apple.security.device.usb
entitlement in order to access USB devices.
Organization of This Document
This document contains the following chapters:
USB Device Overview provides an overview of USB device architecture and terminology and describes how USB devices are represented in OS X.
Working With USB Device Interfaces describes how to use the device interface mechanism to create a command-line tool that accesses a USB device.
Document Revision History lists the revisions of this document.
See Also
The ADC Reference Library contains several documents on device driver development for OS X and numerous sample drivers and applications.
Accessing Hardware From Applications describes various ways to access devices from outside the kernel, including the device interface mechanism provided by the I/O Kit. For an overview of the I/O Kit terms and concepts used in this document, read the chapter Device Access and the I/O Kit.
I/O Kit Framework Reference contains API reference for I/O Kit methods and functions and for specific device families.
Sample Code > Hardware & Drivers > USB includes both application-level and in-kernel code samples. Of particular relevance to this document is the application-level sample USBPrivateDataSample.
OS X Man Pages provides access to existing reference documentation for BSD and POSIX functions and tools in a convenient HTML format.
The usb mailing list provides a forum for discussing technical issues relating to USB devices in OS X.
If you need to develop an in-kernel driver for a USB modem or networking device, refer to the following:
IOKit Fundamentals describes the architecture of the I/O Kit, the object-oriented framework for developing OS X device drivers.
ADC members can view the AppleUSBCDCDriver project in the source code for OS X v10.3.7 and later, available at Darwin Releases. To find the source code, select a version of OS X equal to or greater than v10.3.7 and click Source (choose the source for the PPC version, if there's a choice). This displays a new page, which lists the open source projects available for the version of OS X you've chosen. Scroll down to AppleUSBCDCDriver and click it to view the source. Be prepared to supply your ADC member name and password.
Additional code samples that demonstrate specific in-kernel driver programming techniques are included as part of the OS X Developer Tools installation package in
/Developer/Examples/Kernel/IOKit/usb
.
If you're ready to create a universal binary version of your USB device-access application to run in an Intel-based Macintosh, see Universal Binary Programming Guidelines, Second Edition. The Universal Binary Programming Guidelines describes the differences between the Intel and PowerPC architectures and provides tips for developing a universal binary.
If you are working with a device that complies with the USB mass storage specification but declares its device class to be vendor specific, see Mass Storage Device Driver Programming Guide for information on how to ensure the correct built-in driver loads for the device.
Apple provides additional USB information (including the OS X USB Debug Kits) at http://developer.apple.com/hardwaredrivers/usb/index.html.
A detailed description of the USB device specification is beyond the scope of this document—for more information, see Universal Serial Bus Specification Revision 2.0 available at http://www.usb.org.
Microcomputer Applications USB Devices Driver
Copyright © 2002, 2012 Apple Inc. All Rights Reserved. Terms of Use | Privacy Policy | Updated: 2012-01-09
Microcomputer Applications Usb Devices Driver Windows 7
The I/O Kit provides a device interface mechanism that allows applications to communicate with and control hardware from outside the kernel. This document focuses on how to use that mechanism to create an application that detects the attachment of a USB device, communicates with it, and detects its detachment.
Motorola Device Manager contains USB drivers and software to connect your Motorola phone or tablet to your computer using a USB cable. Uninstall Faulty Device Driver. Right-click on Start button and then click on Device Manager. On the Device Manager screen, expand the entry for Universal Serial Bus Controllers right-click on the Unknown Device and click on Uninstall Device option. On the confirmation pop-up, click on OK to confirm. Xperia USB Driver - Official Driver Sony Xperia USB Driver allows you to connect your Sony Xperia devices to the Windows Computer without the need to install the Sony PC Suite Application. You can find the Official USB Driver for your Xperia Device below or through the Site Search. Sony Xperia 5 II SO-52A. The most common approach has been to implement a device driver, (termed as a USB client driver in this documentation set) and provide an installation package that installs the driver as the function driver in the device stack above the Microsoft-provided USB driver stack.
This document does not describe how to develop an in-kernel driver for a USB modem or networking device. If you need to do this, refer to the documentation and sample code listed in See Also.
Important: If your application is sandboxed, it must request the com.apple.security.device.usb
entitlement in order to access USB devices.
Organization of This Document
This document contains the following chapters:
USB Device Overview provides an overview of USB device architecture and terminology and describes how USB devices are represented in OS X.
Working With USB Device Interfaces describes how to use the device interface mechanism to create a command-line tool that accesses a USB device.
Document Revision History lists the revisions of this document.
See Also
The ADC Reference Library contains several documents on device driver development for OS X and numerous sample drivers and applications.
Accessing Hardware From Applications describes various ways to access devices from outside the kernel, including the device interface mechanism provided by the I/O Kit. For an overview of the I/O Kit terms and concepts used in this document, read the chapter Device Access and the I/O Kit.
I/O Kit Framework Reference contains API reference for I/O Kit methods and functions and for specific device families.
Sample Code > Hardware & Drivers > USB includes both application-level and in-kernel code samples. Of particular relevance to this document is the application-level sample USBPrivateDataSample.
OS X Man Pages provides access to existing reference documentation for BSD and POSIX functions and tools in a convenient HTML format.
The usb mailing list provides a forum for discussing technical issues relating to USB devices in OS X.
If you need to develop an in-kernel driver for a USB modem or networking device, refer to the following:
IOKit Fundamentals describes the architecture of the I/O Kit, the object-oriented framework for developing OS X device drivers.
ADC members can view the AppleUSBCDCDriver project in the source code for OS X v10.3.7 and later, available at Darwin Releases. To find the source code, select a version of OS X equal to or greater than v10.3.7 and click Source (choose the source for the PPC version, if there's a choice). This displays a new page, which lists the open source projects available for the version of OS X you've chosen. Scroll down to AppleUSBCDCDriver and click it to view the source. Be prepared to supply your ADC member name and password.
Additional code samples that demonstrate specific in-kernel driver programming techniques are included as part of the OS X Developer Tools installation package in
/Developer/Examples/Kernel/IOKit/usb
.
If you're ready to create a universal binary version of your USB device-access application to run in an Intel-based Macintosh, see Universal Binary Programming Guidelines, Second Edition. The Universal Binary Programming Guidelines describes the differences between the Intel and PowerPC architectures and provides tips for developing a universal binary.
If you are working with a device that complies with the USB mass storage specification but declares its device class to be vendor specific, see Mass Storage Device Driver Programming Guide for information on how to ensure the correct built-in driver loads for the device.
Apple provides additional USB information (including the OS X USB Debug Kits) at http://developer.apple.com/hardwaredrivers/usb/index.html.
A detailed description of the USB device specification is beyond the scope of this document—for more information, see Universal Serial Bus Specification Revision 2.0 available at http://www.usb.org.
Microcomputer Applications USB Devices Driver
Copyright © 2002, 2012 Apple Inc. All Rights Reserved. Terms of Use | Privacy Policy | Updated: 2012-01-09
Microcomputer Applications Usb Devices Driver Windows 7
Microcomputer Applications Usb Devices Driver Win 7
- August 22, 2019 2.9.8
- January 25, 2019 2.9.6
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.9.6
Released
January 25, 2019
Type
ZIP
Filesize
3MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Added missing Tonemapping Auto property.
- May 4, 2018 2.9.5
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.9.5
Released
May 4, 2018
Type
ZIP
Filesize
3MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 controller
- Graphics card with 24 or 32 bit
- Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.
- November 21, 2017 2.9.4
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.9.4
Released
November 21, 2017
Type
ZIP
Filesize
3.2MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Repaired not working J003 mono sensor pattern fix on particular video formats.
- This driver version is the last that works in Windows XP.
- January 9, 2017 2.9.3
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.9.3
Released
January 9, 2017
Type
ZIP
Filesize
3.2MB
Requirements
Download Citrix Workspace App, Citrix ADC and all other Citrix workspace and networking products. Receive version updates, utilities and detailed tech information. Important update about Citrix Receiver Beginning August 2018, Citrix Receiver will be replaced by Citrix Workspace app. While you can still download older versions of Citrix Receiver, new features and enhancements will be released for Citrix Workspace app. Citrix driver download for windows. Citrix Receiver for Windows product software. Citrix Workspace App Workspace app for Windows Current Release Subscribe to RSS notifications of new downloads.
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Added a pattern fix for J003 mono sensors.
- January 9, 2017 2.9.1
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.9.1
Released
January 9, 2017
Type
ZIP
Filesize
3.2MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.
- January 15, 2016 2.8.9
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.8.9
Released
January 15, 2016
Type
ZIP
Filesize
2.3MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Changed certificates so that the driver can also be installed in Vista.
- November 9, 2015 2.8.7
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.8.7
Released
November 9, 2015
Type
ZIP
Filesize
2.3MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Fixed an error which can appear when using sharpness on older CPUs.
- October 20, 2015 2.8.5
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.8.5
Released
October 20, 2015
Type
ZIP
Advantech port devices driver download win 7. Filesize
2.3MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Fixed a bug which can appear on LivePause call.
- July 15, 2015 2.8.0
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.8.0
Released
July 15, 2015
Type
ZIP
Filesize
2.4MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Support of DFK ECU010-L34 with serial number property.
- Added tone mapping.
- February 17, 2015 2.7.33
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.7.33
Released
February 17, 2015
Type
ZIP
Filesize
2.4MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.
- February 5, 2015 2.7.32
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.7.32
Released
February 5, 2015
Type
ZIP
Filesize
2.4MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.
- January 14, 2015 2.7.31
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.7.31
Released
January 14, 2015
Type
ZIP
Filesize
2.3MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Support for IMX236 based cameras.
- Support for RGB64 color formats.
- Several performance improvements.
- June 6, 2014 2.7.9.1152
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.7.9.1152
Released
June 6, 2014
Type
ZIP
Filesize
2.1MB
Requirements
- Intel Core i3 or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast.
- Added new property: Highlight reduction.
- Added new property: White balance temperature controls.
- Pixelfix for Y16 cameras now works as expected.
- VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.
- January 1, 2014 2.6.5.1014
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.6.5.1014
Released
January 1, 2014
Type
ZIP
Filesize
1.9MB
Requirements
- Intel Pentium IV or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- Fixed missing auto-gain for DFK AFU130.
- Fixed focus when start value is out of auto_focus_range.
- Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong.
- Fixed auto focus ROI not working for 21*UC cameras.
- Fixed crash on load/connect with certain cameras 22/72xUC.
- Fixed previous exposure settings not being loaded on reconnect.
- Complete reworking of internal property system.
- Fixed Windows XP driver load crash.
- Fixed drop counter to be accessible from DirectShow.
- Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible).
- Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.
- February 26, 2013 2.4.14.851
Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
Version
2.4.14.851
Released
February 26, 2013
Type
ZIP
Filesize
1.9MB
Requirements
- Intel Pentium IV or similar, 2 GB RAM
- USB 3.0 or USB 2.0 controller (depends upon camera model)
- Graphics card with 24 or 32 bit
- Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
- DirectX 9.0c or higher
Changelog
- WHQL certification.